MERIDIAN
  • Home
  • BRIDGE MILLS
    • BM Series >
      • BM Construction & Design
      • BM Industries Served
      • BM Machine Model Selection
      • BM 5 Axis Simultaneous
    • BM-5 Axis Series >
      • 5 Axis Construction & Design
      • 5 Axis Controls
      • 5 Axis Milling Heads
      • 5 Axis Machine Model Selection
    • BM-W Axis Series >
      • W Axis Construction & Design
      • W Axis Industries Served
      • W Axis Machine Model Selection
      • W Axis / 5 Axis Simultaneous
  • GANTRY MILLS
    • GM Series >
      • GM Construction & Design
      • GM Industries Served
      • GM Machine Model Selection
      • GM 5 Axis Simultaneous
    • GM-5 Axis Series >
      • 5 Axis Construction & Design
      • 5 Axis Industries Served
      • 5 Axis Machine Model Selection
      • 5 Axis Controls
    • GM-W Series >
      • W Axis Construction & Design
      • W Axis Industries Served
      • W Axis Machine Model Selection
      • W Axis / 5 Axis Controls
  • VTL
    • RAM Series >
      • RAM Construction & Design
      • RAM Industries Served
      • RAM Machine Model Selection
    • TURRET Series >
      • Turret Construction & Design
      • Turret Industries Served
      • Turret Machine Model Selection
  • GRINDERS
  • Customer Support
    • Contact Us
  • About
Picture
Request a quote

Cast Iron Table Design

Picture
Picture
Very heavy box-in-box cast iron fram for heavier table loads over the competition. This is the best design for rigidity, and accuracy when machining heavy parts and table loads. Most companies have a light weight solid frame.

Cross Beam, Saddle and Spindle Box

Picture
Picture
Picture
The cross beam is engineered with rectangular reinforced ribs dampening harmonics and vibration. This perfect design allows for heavy side load cutting, and interrupted cuts while achieving minimal deflection and stress. Heavy deep face milling, and helical interpolation is no problem at higher feed rates! Minimal deflection improving tool life, reducing chatter and creating superior finishes. 


​Our Engineers have designed the spindle box casting area to be 400x450mm² for maximum stiffness. We have an optional 550x550mm², 650x650mm² size when using our high torque rams. We have many options on torque and will customize the machine to fit your cutting application. We support the ram with RGH roller guide ways for High rigidity to the ram. The cross-sectional modules are rectangular with a proportion of 1:1.125 (400mm: 450mm) and reinforced by the interior ribbed frame. The high quality roller-rail RGH linear guideway lengths have a cover-rate 56~76% which supports the cutting feed, rigidity, and stability
 
Box-in-box structural design replace with hollow column, which is 50% heavier than other competitor their products.
The column and crossbeam their linking surface adjusted by hand scraping. The verticality, flatness increases the structure stiff rigidity.
 

Inspection & Alignment


The whole machine is tested and laser calibrated according to standards ISO, DIN, JIS, CNS...
Geometry accuracy: Straightness, perpendicularity, flatness by laser gauging and circularity by ball-bar test.


                 ALL MACHINES ARE ASSEMBLED, TESTED, AND RAN FOR ACCURACY AND PERFORMANCE.
   ALL MACHINES WILL INCLUDE CERTIFIED DOCUMENTATION OF ACCURACY AND PERFORMNCE REPORT.


Skillful Hand Scrapping Techniques


Structure surfaces are processed by precision hand scraping. No cutting corners for these high quality well-crafted machines. As we know this increases the structural rigidity and the stability for high accuracy and repeatability.

NAS Test Cut Performed on all Machines.
Circle, Diamond, Square, and additional Hole patterns



Frame Design & Spindle Mount

Picture


​
More time consuming and expensive procedure to locate the Spindle motor and Gearbox on top of the Spindle Box Assembly
​

   1) To isolate the heat source.
   2) To isolate the vibration source.
   3) To increase the deep machining.
   4) To keep the heavy duty cutting and stability.
   4) To protect the spindle life.
   5) Spindle Center is Very Close to Cross Rail – Highest Rigidity

Big Plus Spindle Option on All Machines

Picture




​BT is a single contact (taper fit) BBT is the /Dual contact (Flange and taper fit).
BBT must be BBT spindle with BBT tool.​


Quality Through and Through


Picture
Our products are qualified by high quality, superior performance, high productive capacity and high reliability. We continuously Achieve ISO 9001 & ISO14001 excellent quality guaranteed as our goal, would become the highest quality CNC machine manufacturer.
 
Our products get two essential factors "position accuracy" and "repeatability accuracy",
so completely conform to JISB6338, VDI/DGQ3441 and ISO-8636 standard specification.
Quality system ISO9001 & ISO 14001 Standard Specification JISB6338, VDI/DGQ3441, ISO-8636

To explore options of working with Meridian, reach out to us today!


Telephone

205-942-1100

Email

kris@kearneymachinery.com
  • Home
  • BRIDGE MILLS
    • BM Series >
      • BM Construction & Design
      • BM Industries Served
      • BM Machine Model Selection
      • BM 5 Axis Simultaneous
    • BM-5 Axis Series >
      • 5 Axis Construction & Design
      • 5 Axis Controls
      • 5 Axis Milling Heads
      • 5 Axis Machine Model Selection
    • BM-W Axis Series >
      • W Axis Construction & Design
      • W Axis Industries Served
      • W Axis Machine Model Selection
      • W Axis / 5 Axis Simultaneous
  • GANTRY MILLS
    • GM Series >
      • GM Construction & Design
      • GM Industries Served
      • GM Machine Model Selection
      • GM 5 Axis Simultaneous
    • GM-5 Axis Series >
      • 5 Axis Construction & Design
      • 5 Axis Industries Served
      • 5 Axis Machine Model Selection
      • 5 Axis Controls
    • GM-W Series >
      • W Axis Construction & Design
      • W Axis Industries Served
      • W Axis Machine Model Selection
      • W Axis / 5 Axis Controls
  • VTL
    • RAM Series >
      • RAM Construction & Design
      • RAM Industries Served
      • RAM Machine Model Selection
    • TURRET Series >
      • Turret Construction & Design
      • Turret Industries Served
      • Turret Machine Model Selection
  • GRINDERS
  • Customer Support
    • Contact Us
  • About